BC-2402/2 Way solenoid valve
Pilot operated valve
In rest position the medium pressure coming through the pilot-hole increases the pressure on the upper side of the diaphragm. The valve remains closed.
When activated only the pilot valve opens. A relief-opening causes a pressure-reduction on the upper side of the diaphragm. The medium pressure can lift it, the valve opens.
| Housing | Brass |
|---|---|
| Pressure range | 0,5 - 16 bar |
| Seal | NBR, EPDM, FKM |
| Connection | G 3/8 - G 2 |
| Type of protection | Mining Chemicals |
Our 2/2 way valve bc-240 is jointly suitable for being used with the above valve solenoid pursuant to category i m2 and ii 2g.(≤ ½”).
The use is restricted as shown on the solenoid’s type plate and not admissible without the above BC solenoid. Please observe the operating instructions for both the valve and the solenoid. The devices conform to the following standards:
DIN EN 60079-0:2012
(General provisions)
Electrical devices for hazardous areas (explosive)
DIN EN 60079-11:2012
(Intrinsic safety i)
Electrical devices for hazardous areas (explosive)
DIN VDE 0580.2000
General requirements for electromagnetic devices
DIN EN 13463-1:2009
Non-electric equipment (Fundamentals) or
DIN EN 60079-0:2009
(general requirements)
Electrical apparatus for potentially explosive atmospheres
DIN EN 60079-18:2009
(flameproof enclosure m)
Electrical apparatus for potentially explosive atmospheres
| Documents | Data sheet |
|---|---|
| Atex certificate | 089 Compilation of certificates |
| Decleration of conformity | |
| Operation manual |